Compressor Services
Remanufacturing
-
-
- We perform remanufacturing on defective and malfunctioning compressors in our state of the art engineering facility.
- The extent of remanufacturing depends on the severity of the defect. Each compressor is a unique case for us. Therefore, we will provide a comprehensive report and competitive pricing for your compressor.
-
Get a quote for remaufacturing
Overhauling
We perform overhauling in our state of the art engineering facility based on:
-
-
- Run hours requirements (Requirement might differ for each brand and as per operating conditions. 30-40 thousand running hrs is a typical overhaul period)
- Vibration analysis results
- Oil analysis results
- Other reasons
-
Functional Test
Once the reassembly is complete, the compressor goes through the following tests;
-
-
- Leak testing: The compressor pressurized to a slightly higher pressure than the maximum operating pressure for a given period to ensure that there is no leak.
- Motor testing: Via insulation tester and multimeter all motor parameters are measured and recorded.
- Run test: Via proportional power feed, through properly sized industrial grade frequency inverter, the compressor is run tested on our proprietary test bench to ensure that the compressor is smoothly running.
-
Performance Test (optionally available at an extra cost)
The performance test is being performed on our proprietary test bench via proportional power feed by properly sized industrial grade frequency inverter, as well as pressure simulator on the suction and discharge ports. Crucial operating parameters of the compressor are tested and recorded in real-time via a data logger. The results are submitted. This report shows the capacity to be expected in comparison with a brand new compressor of the same type/brand/capacity rating.
This service is optionally available at an extra cost.
All Inclusive Turn Key Service
With this optional service, in addition to a.m. activities, we also perform the safe dismantling, transportation from & to the chiller plant, installation of the compressor, carry on the required start-up and commissioning activities on the specific chiller.
Warranties
-
-
- Standard Warranty: Remanufactured or overhauled compressors provided with 12 months warranty
- Extended Warranty: Optional warranty period extension is available together with a service plan
-
Temporary Import/re-export From Your Location
-
-
- No matter where you are, we can collect your defective compressor and return back to your location after renewal processing.
-